電化鋁,Eletrolytic Aluminium Sheet

1)Eletrolytic Aluminium Sheet電化鋁

英文短句/例句

1.Hot Stamping FoilGB/T10456-1989電化鋁燙印箔

2.Marketing Evolution Of Bauxite,Alumina And Electrolytic Aluminum;鋁土礦、氧化鋁和電解鋁產業鏈市場及利潤流向

3.An Optimum Pattern For Development Of Aluminum Industry In Chinese Mainland--The Optimum Integration Of Coal,Electric Power,Aluminum,And Aluminum Semis Idustries;煤—電—鋁—鋁材一體化:中國發展鋁工業最佳模式

4.Electroplating Al Coating In Molten Salt And High Temperature Oxidation Process;熔融鹽電鍍鋁及鍍鋁層高溫氧化的研究

5.Application And Practice Of Domestic Alumina In Aluminum Eletrolysis Production國產氧化鋁在鋁電解生產中的應用實踐

6.Research On The Reduction Of Aluminium Fluoride Consumption In Aluminium-Smelting Process降低氟化鋁在鋁電解生產過程中消耗的探討

7.High Temperature Antioxidation Mechanism Of Arc-Sprayed Fe-Cr-Al/Al Composite Coatings電弧噴涂鐵鉻鋁/鋁復合涂層的高溫抗氧化機理

8.Melt Purification In The Course Of Producing Aluminum Alloy Slab By Using Electrolytic Aluminum Melt用電解鋁液生產鋁合金扁鑄錠的熔體凈化工藝

9.Advantage Analysis Of Anhydrous Aluminium Fluoride Application In Primary Aluminium Smelting Production無水氟化鋁對電解鋁生產的有利因素分析

10.The Study Of The Enlarge Of Current In 160KA Cell;160KA預焙鋁電解槽強化電流試驗研究

11.Optimize Study On Electrical Conductivity Of Low -Temperature Containing Potassium Melting Baths For Aluminium Electrolysis含鉀低溫鋁電解質導電性能優化研究

12.Discussion On The Technology Of Increasing The Current Of Large Prebaked Cell大型預焙鋁電解槽強化電流技術探討

13.Study Of Electrochemical Impedance Spectroscopy On Anodized Aluminum Alloys;鋁陽極氧化膜的電化學阻抗特征研究

14.ELECTROCHEMICAL CHARACTERISTICS OF PHOSPHATING ACCELERATED BY RARE EARTH NITRATE ON ALUMINUM ALLOY鋁合金稀土硝酸鹽磷化的電化學行為

15.An Electic Current Is Applied To The Cell, Converting The Aluminium Surface Into A Coating Of Aluminium Oxide.電解池通過電流，鋁片的表面就逐漸積聚起氧化鋁層。

16.Study And Application On Current Intensifying And Simulation Of Thermal-Electric Field In Prebaked Anode Aluminum Reduction Cells;鋁電解槽電流強化與電熱場仿真研究及應用

17.The Competition Mechanism Of Passivation-Activation Of Surface And Tunnel Walls In The D.C. Etching Of Aluminum Foils For Electrolytic Capacitors;電子鋁箔直流電侵蝕過程的鈍化—活化競爭機制

18.Code For Ventilation And Fume Purification Design Of Aluminium Smelters鋁電解廠通風與煙氣凈化設計規范

相關短句/例句

Aluminizer電化鋁箔

3)Hot-Pressure Printing電化鋁燙印

4)An Integrated Enterprise Composed Of Electric Power And Electrolgtic Aluminum Divisions鋁電一體化

5)Fused Alumina電熔氧化鋁

6)Alumina Arc Tube氧化鋁電弧管

延伸閱讀

鋁電化學搓紋分子式：CAS號：性質：光敏印刷版制作中的必要工序。通過電化學法，在平整的鋁材表面形成具有均勻孔蝕排列和一定深度和間距的毛面，用于控制印刷過程中親水負圖像的表面積。電化學搓紋使用交流電，當電流密度為20～100mA·cm-2時，在體積百分數為0.5％～3％HCl溶液中，刻蝕5～20min。為了提高搓紋的速率和均勻性，目前有的已采用HCl-H3PO4，HNO3，CH3COOH和H3BO4等電解液，同時使用攪拌及多種波形的電源。